.png?width=300&height=151&name=ZPC_Primary_Horizontal_600x300_RGB_WHITE%20(1).png)
Accelerating Electron-On-Helium cQED Research With The ZPC 500 mK
EeroQ accelerated its quantum computing research by integrating ZPC’s goldilocks system: the 500 mK patented Phase Separation Refrigerator (PSR), cutting measurement turnaround cycles into a third of the time while maintaining rigorous thermal stability for single-electron cQED architectures.

EeroQ is a quantum computing pioneer building scalable, single-electron qubits trapped on the surface of liquid helium on standard CMOS silicon chips. By packing millions of highly coherent, fast-operating qubits onto a single device using existing semiconductor infrastructure, EeroQ stands as an industry leader solving quantum hardware's biggest scaling hurdles.
CMOS Scalability:
Fabricated with standard manufacturing for high yield, nanometer precision, and low resource overhead.
Superfluid Isolation:
Helium dielectric layers protect electron purity, delivering exceptionally long coherence times.
Single-Chip Density:
Houses millions of connected qubits and high-speed microwave controls on one device.
Recognizing that breakthrough hardware requires equally agile execution, EeroQ partnered with ZPC to streamline development—doubling their device throughput and dramatically cutting their R&D timelines.
The Challenge: Bridging the Cryogenic Gap
Developing these quantum processors requires strict sub-kelvin temperatures, ample cold-stage space for large cryogenic components (such as filters and microwave circulators), and high-density wiring—including DC lines and microwave coaxial lines. Prior to acquiring the ZPC 500 mK PSR, EeroQ faced a common operational bottleneck due to limitations in their existing cryogenic systems.
1 K 4He Cryostat: Provided relatively fast testing access but failed to reach the sub-kelvin temperatures required for many critical measurement objectives.
10 mK Dilution Refrigerator: Reached target base temperatures but suffered from notoriously long cooldown and warm-up cycles, stretching experimental testing loops to several days and severely limiting R&D iteration speed.
"The dilution fridge had too long a turnaround time while the 4He cryostat did not get quite cold enough to achieve many of our objectives. "
EeroQ selected the ZPC 500 mK PSR to eliminate their iteration bottleneck—serving as a "Goldilocks" platform that hits the optimal sub-kelvin thermal sweet spot for rapid device testing
The Solution: Rapid Turnarounds & Future-Proofing

The primary driving factors for Eeroq were the PSR's affordability, its compact footprint, and overwhelmingly, its fast turnaround capabilities. Furthermore, the option to easily upgrade the unit to a full dilution refrigerator in the future provided a long-term benefit, allowing the team to prioritize speed today while keeping hardware expansion paths open without replacing core infrastructure.
The PSR was invented for industry leaders like EeroQ, who need affordable systems that don’t compromise quality or cooling.
How ZPC Solved EeroQ's Challenge
-
Unmatched Affordability: Operates using a fraction of the 3He required by traditional dilution refrigerators, dramatically lowering both upfront capital and long-term operational costs.
-
Thermal Capacity: Reaches a 500 mK base temperature with 30 mW of cooling power at 1 K, easily absorbing heat loads from EeroQ's DC lines and microwave coax cables.
-
Compact Footprint with a Spacious Cold Stage: The compact footprint of 2.0 m2 features an expansive experimental area (340 mm diameter and >600 mm vertical space) to fit EeroQ’s larger sample enclosures, circulators, and filters costs.
-
Rapid Turnaround: Cuts cooldown times to 8–10 hours (under 12 hours for a full sample swap), replacing multi-day waits with daily testing cycles.
-
Future-Proof Upgrade: Has the ability to seamlessly convert into a full dilution refrigerator, preserving EeroQ's initial hardware investment while maximizing speed today.
By swapping multi-day thermal cycles for rapid, continuous 500 mK testing, the ZPC PSR eliminated experimental downtime and significantly accelerated EeroQ's quantum R&D output
Operational Impact & Results
The integration of the ZPC 500 mK PSR doubled EeroQ's operational throughput by enabling highly efficient two-day turnaround cycles, delivering “excellent performance”.
Dr. Rees emphasized that while the short cooldown time is extremely convenient, so is the even quicker warm-up time.
“We can start a cooldown before leaving the lab in the evening, immediately do measurements the next day and can be warm again in a few hours , so a 1-day complete turnaround is possible.
For a dilution fridge, the same cycle takes 4 days, so we have effectively more than doubled our efficiency.”
The system, according to Dr. Rees, was “perfectly suited” to handle the facility's extensive wiring and large sample space requirements.
1-Day Iteration Cycles: The convenient 8–10 hour cooldown and fast warm-up times allow researchers to start a cooldown before leaving the lab in the evening, immediately collect data the following day, and return to room temperature by the end of day two.
High-Density Integration: The cold stage comfortably housed “all the wiring and sample space [they] needed for the measurements”, including all microwave circulators, filters, and approximately 60 total signal lines.
Rock-Solid Stability: PID control provided precise temperature regulation just above base temperature for heavily heat-sensitive runs. Dr. Rees commented that “some measurements are highly temperature sensitive, so we have used the PID control to sit at a stable temperature within 1 mK, just above the base temperature. We have not noticed any impact from vibrations, despite some of our measurements being fairly sensitive to this.”
Responsive Support & Service
Beyond hardware excellence, ZPC provided seamless, end-to-end support throughout the entire project lifecycle—from initial design and precision manufacturing to installation and aftercare. When unexpected setup hurdles emerged, ZPC’s engineering team stepped up with immediate, hands-on assistance.
When navigating complex cryostat grounding schemes and optimizing software functionality, this proactive partnership ensured a smooth deployment, proving that ZPC delivers both cutting-edge technology and world-class technical support.
Key Technical Milestone
This integration has been a resounding success from day one: upon installation, the ZPC 500 mK PSR was immediately employed to advance EeroQ's active project developing AI-assisted control of single electrons on helium in quantum dot devices.
Driven by the system’s rapid turnaround capabilities and continuous sub-kelvin stability, the team is already gathering excellent results and anticipates publishing these findings in the near future. By eliminating long-standing cryogenic bottlenecks and effectively doubling R&D throughput, ZPC proved to be the ideal partner—delivering the precise thermal foundation EeroQ needed to fast-track the future of commercial quantum computing
.png?width=2000&height=2000&name=Model_L_1K_Full_syetem_opened_B%20(2).png)
“I was very impressed by the dedication and enthusiasm shown by the ZPC engineers. They were always quick to respond and willing to help”
.png)